日立/牛津 FOUNDRY-MASTER Smart全譜火花臺式直讀光譜儀

SKU: FOUNDRY-MASTER Smart
FOUNDRY-MASTER Smart全譜火花直讀光譜儀適用于鐵、鋁、銅、鎳等金屬樣品的成分分析，根據客戶的具體要求，本銷售協議所對應的儀器的分析范圍為鐵基和鋁基。

FOUNDRY-MASTER Smart臺式直讀光譜儀技術參數

FOUNDRY-MASTER Smart臺式光譜儀可應用于固體金屬樣品的元素定量分析及牌號鑒定。光學系統采用CCD檢測器，光譜范圍覆蓋黑色、有色金屬典型材料，全新數字光源，儀器裝備有氬氣沖洗火花臺，開放式火花臺適合不同形狀和尺寸的樣品分析。

Spectrometer Optical System光譜儀光學系統

Flat field Multi-CCD optics平場多CCD光學系統
Focal length : 300 mm. 焦距：300 mm
Effective wavelength 175 – 671nm. 有效波長范圍：175 – 671nm
Pixel resolution 14 pm. 像素分辨率：14 pm
Reciprocal dispersion（1st order）. 線色散率倒數(一級)：1.75nm/mm
External entrance window, easy access for cleaning or exchange外部入射窗口，方便清洗及更換
High stability against outside influences thanks to Peak Position Alignment (PPA).
實時波長校準功能保證了優異的長期穩定性。
Solid, robust technology and compact design allow continuous use in any location, in the lab or on site, even in rugged conditions.
保證儀器能夠在任何惡劣的環境中持續正常工作，從實驗室到爐前現場，甚至更嚴酷的環境。

Spark Source火花源

New digital spark generator with optimized discharge parameters for atomic lines, lowering detection limits of a wide range of elements全新的數字光源，電腦調節最優的火花激發參數，幫助降低元素檢出限
High energy pre-spark (HEPS) 高能預燃技術 (HEPS)
Computer controlled parameters計算機調節參數
Frequency 80– 500 Hz頻率80 – 500 Hz
Voltage 250 – 500 V電壓250– 500 V

Argon Flushed Spark Stand氬氣沖洗火花臺

Three-sided open sample stand開放式樣品臺設計
Jet-Stream-Electrode with low argon consumption低氬氣消耗的“噴射電極”技術
Universal adjustable sample clamp通用可調樣品適配器
Exchangeable sparkstand plate for individual matrices特殊樣品可更換相應火花臺
Air cooled空氣冷卻系統

Computer and readout system (external PC) 計算機及讀出系統（筆記本電腦）

Intel(R) i5-5200U 英特爾i5處理器
Windows 10 operating systems Windows 10操作系統旗艦版
Min. 2.20 GHz and 4 GB Ram 主頻2.20GHz內存4.00GB
AMD Radeon R5 M330 顯卡
Hard disk 硬盤容量500GB
CD-burner CD燒錄功能
Multi-channel A/D converter多通道A/D轉換
Fire-Wire, LAN Ethernet防火墻，局域網
Parallel interface并口
Serial (RS 232) Interface系列RS232接口
2 USB Interfaces, 2個USB接口，
VGA Video port視頻輸出功能
Battery life 5 hours電池續航時間 5個小時
External, 14.1 “TFT-LCD–Display 14.1 “液晶顯示器
Resolution 1280 * 800 分辨率1280 * 800
Weight 1.94Kg 重量 1.94千克

Data Output數據輸出

Matrix-, Inkjet-, Thermo- or Laser-printer, all standard printers can be used可接駁各種標準打印設備
Storage on disc (or other medium) and transfer to other programs (Excel, PDF) 數據存儲在移動存儲器上或以Excel、PDF形式輸出
Network connection via serial or USB-Interface網絡連接通過串口或USB接口

Software軟件

Operating system Windows 8 Windows 8操作系統,
spectrometer software WAS光譜儀WasLab操作軟件
Optional data maintenance programs 可選數據維護程序

Analytical Functions of Spectrometer Software操作軟件分析功能

Type recalibration控樣校正
Global or partial recalibration全局或局部標準化
Reproducibility check during recalibration and analysis校準和分析時再現性檢查
Automatic display of required recalibration- or control samples校準或監控樣品的自動顯示
Flagging of results beyond calibration range自動標識超出曲線范圍的結果
Input of user-defined sample identity codes用戶自定義樣品碼輸入
Automatic or user-controlled printout of analytical results自動或用戶自定義分析結果的打印、存儲及輸出
Free editable grade database自定義牌號數據庫
Grade-search and identification牌號搜索和牌號鑒定功能
Input of user-defined formulas自定義公式輸入
Output of analytical results in light quantity intensities, ratios, recalibrated intensity ratios, corrected recalibrated intensity ratios 分析結果可顯示絕對強度、相對強度、標準化強度和校正強度等多種形式
Output of analytical results in concentration, mass percentage, mass percentage related to spectral lines 分析結果可用濃度、通道濃度表示
1 or 2 point recalibration單點標或兩點標準化
Additive and multiplicative interelement correction干擾校正
Matrix correction基體校正
Automatic spectral line switching 譜線自動切換
Calculation of average, standard deviation and variation coefficient for any number of burns任意激發次數測量結果的平均值、標準偏差及相對標準偏差等計算
Automatic hardware diagnostics硬件故障自動診斷
Graphical display of spectra 光譜圖形顯示
Storage of spectral information for future evaluation譜圖信息存儲

TECHNICAL DATA 技術數據

Dimensions 尺寸:

高： 280 mm
長： 665 mm
寬： 415 mm
重量：35 kg

電源要求：

220 V /50 Hz
運行功率700 W
待機功率50 W
16 A慢熔保險絲

氬氣要求：

99.999%高純氬氣, purity 5.0
進氣壓力3bar,Pressure 3 bar
銅管Copper argon duct , unpolluted (e.g. solder)

儀器分析范圍

FOUNDRY-MASTER Smart直讀光譜儀鐵基體分析范圍

元素	Fe 100		Fe 150		Fe 200		Fe 250		Fe 300		Fe 305		Fe 400		Fe 500		Fe 000
	low alloy steel		free cutting steel		cast iron		Cr-Hard/Ni.Resist		stainless steel		stainless steel + N		tool steel		high Mn steel		Fe-Orientation
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
C	0.003	1.8	0.003	1.8	1.7	5	1	4.5	0.005	2.6	0.005	2.6	0.003	2.6	0.003	1.8	0.005	4
Si	0.003	2.4	0.003	2.3	0.003	6	0.005	7	0.005	4.5	0.005	4.5	0.002	1.5	0.002	2	0.005	7
Mn	0.002	2.5	0.005	2.5	0.003	1.6	0.003	2.4	0.002	18	0.002	18	0.002	2.5	7	22	0.005	25
P	0.002	0.2	0.003	0.15	0.003	0.8	0.003	0.55	0.002	0.17	0.002	0.17	0.002	0.15	0.002	0.15	0.005	0.8
S	0.002	0.1	0.002	0.45	0.002	0.22	0.003	0.25	0.003	0.42	0.003	0.42	0.002	0.15	0.002	0.15	0.005	0.45
Cr	0.003	5.5	0.003	5.5	0.003	2.5	0.005	40	0.002	35	0.002	35	0.002	22	0.003	5	0.005	40
Mo	0.005	1.8	0.005	1.5	0.003	2	0.005	4	0.003	8	0.003	8	0.003	11	0.005	2.2	0.005	11
Ni	0.003	5.5	0.005	5.5	0.005	3.5	0.005	31	0.005	55	0.005	55	0.003	5	0.005	4.5	0.005	55
Al	0.002	1.7	0.002	1.7	0.002	1.4	0.002	0.15	0.002	6	0.002	6	0.005	0.5	0.005	0.5	0.005	6
Co	0.002	1	0.003	0.9	0.002	0.5	0.004	0.3	0.002	13	0.002	13	0.002	13	0.002	0.4	0.005	13
Cu	0.003	1	0.001	0.8	0.003	3.5	0.002	10	0.002	8.5	0.002	8.5	0.001	1	0.002	1	0.005	10
Nb	0.001	1.7	0.003	1	0.002	0.2	0.003	0.5	0.003	3.5	0.003	3.5	0.001	1.7	0.001	1	0.005	3
Ti	0.001	1	0.002	0.5	0.001	0.35	0.005	0.35	0.001	2.3	0.001	2.3	0.001	1	0.001	1.2	0.005	2
V	0.001	1	0.002	1	0.002	0.8	0.005	1	0.001	1	0.001	1	0.002	11	0.001	0.5	0.005	10
W	0.005	2	0.025	2	-	-	0.01	0.4	0.01	4	0.01	4	0.01	22	-	-	0.025	25
Zr	0.002	0.5	0.005	0.5	0.003	0.06	-	-	0.002	0.4	0.002	0.4	-	-	-	-	-	-
As	0.002	0.1	0.005	0.1	0.002	0.15	-	-	-	-	-	-	0.002	0.1	-	-	-	-
Sn	0.002	0.3	0.002	0.3	0.003	0.25	0.003	0.25	-	-	-	-	0.002	0.35	0.002	0.15	-	-
B	0.0005	0.015	0.0005	0.015	0.001	0.11	-	-	0.001	0.015	0.001	0.015	-	-	-	-	-	-
Ca	0.0005	0.01	0.0005	0.01	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Pb	0.001	0.05	0.01	0.35	0.003	0.3	-	-	0.003	0.3	0.003	0.3	-	-	-	-	0.005	0.3
Mg	-	-	-	-	0.0005	0.125	-	-	-	-	-	-	-	-	-	-	-	-
Bi	0.001	0.15	0.01	0.15	0.002	0.025	-	-	-	-	-	-	-	-	-	-	-	-
Zn	0.002	0.025	0.001	0.025	0.002	0.04	-	-	-	-	-	-	-	-	-	-	-	-
Sb	0.005	0.24	-	-	0.005	0.28	-	-	0.005	0.24	0.005	0.24	-	-	-	-	-	-
Se	0.001	0.05	-	-	0.004	0.07	-	-	0.01	0.4	0.01	0.4	-	-	-	-	-	-
Ce	-	-	-	-	0.002	0.08	-	-	-	-	-	-	-	-	-	-	-	-
La	-	-	-	-	0.001	0.05	-	-	-	-	-	-	-	-	-	-	-	-
Fe	internal Standard		internal Standard		internal Standard		internal Standard		internal Standard		internal Standard		internal Standard		internal Standard		internal Standard

用戶提供標樣，日立分析儀器可現場延長測量上限。

FOUNDRY-MASTER Smart直讀光譜儀鋁基體分析范圍

元素	Al 100		Al 200		Al 300		Al 400		Al 450		Al 500			Al 000
	low alloy Al		Al-Cu alloy		Al-Mg alloy		Al-Si alloy		Al-Si-Cu alloy		Al-Zn alloy			Al-Orientation
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min		Max
Ag	0.001	1.2	0.001	1.2	0.001	1.2	0.001	1.2	0.001	1.2	0.001	1.2	0.001		1.2
B	0.0005	0.025	0.0005	0.025	0.0005	0.025	0.0005	0.025	0.0005	0.025	0.0005	0.025	0.0005		0.025
Be	0.0001	0.02	0.0001	0.02	0.0001	0.02	0.0001	0.02	0.0001	0.02	0.0001	0.02	0.0001		0.02
Bi	0.01	0.7	0.01	0.7	0.01	0.7	0.01	0.7	0.01	0.7	0.01	0.7	0.01		0.7
Ca	0.0001	0.02	0.0001	0.02	0.0001	0.02	0.0001	0.02	0.0001	0.02	0.0001	0.02	0.0001		0.02
Cd	0.001	0.4	0.001	0.4	0.001	0.4	0.001	0.4	0.001	0.4	0.001	0.4	0.001		0.4
Co	0.003	0.5	0.003	0.5	0.003	0.5	0.003	0.5	0.003	0.5	0.003	0.5	0.003		0.5
Cr	0.001	0.7	0.001	0.7	0.001	0.7	0.001	0.7	0.001	0.7	0.001	0.7	0.001		0.7
Cu	0.001	0.7	0.001	11	0.001	5	0.001	4	0.001	11	0.001	4	0.001		11
Fe	0.001	2.2	0.001	2.2	0.001	3	0.001	3	0.001	2.2	0.001	2.2	0.001		3
Ga	0.001	0.15	0.001	0.15	0.001	0.15	0.001	0.15	0.001	0.15	0.001	0.15	0.001		0.15
Hg	0.005	0.08	0.005	0.08	0.005	0.08	0.005	0.08	0.005	0.08	0.005	0.08	0.005		0.08
In	0.005	0.2	0.005	0.2	0.005	0.2	0.005	0.2	0.005	0.2	0.005	0.2	0.005		0.2
La	0.001	0.04	0.001	0.04	0.001	0.04	0.001	0.04	0.001	0.04	0.001	0.04	0.001		0.04
Li	0.0001	0.035	0.0001	0.035	0.0001	0.035	0.0001	0.035	0.0001	0.035	0.0001	0.035	0.0001		0.035
Mg	0.001	1.5	0.001	1.5	0.001	13	0.001	3	0.001	3	0.001	4	0.001		13
Mn	0.002	2.2	0.002	2.2	0.002	2.2	0.002	2.2	0.002	2.2	0.002	2.2	0.002		2.2
Mo	0.001	1	0.001	1	0.001	1	0.001	1	0.001	1	0.001	1	0.001		1
Na	0.0005	0.035	0.0005	0.035	0.0005	0.035	0.0005	0.035	0.0005	0.035	0.0005	0.035	0.0005		0.035
Ni	0.003	2	0.003	3.5	0.003	3.5	0.003	3.5	0.003	3.5	0.003	3.5	0.003		6
Pb	0.005	1.8	0.005	1.8	0.005	1.8	0.005	1.8	0.005	1.8	0.005	1.8	0.005		1.8
Sb	0.05	0.7	0.05	0.7	0.05	0.7	0.05	0.7	0.05	0.7	0.05	0.7	0.05		0.7
Si	0.002	1.5	0.002	1.5	0.002	1.5	0.002	28	0.002	28	0.002	1.5	0.002		28
Sn	0.005	0.3	0.005	0.5	0.005	4.5	0.005	0.5	0.005	4.5	0.005	4.5	0.005		4.5
Sr	0.0001	0.16	0.0001	0.16	0.0001	0.16	0.0001	0.16	0.0001	0.16	0.0001	0.16	0.0001		0.16
Ti	0.001	0.3	0.001	0.7	0.001	0.7	0.001	0.3	0.001	0.7	0.001	0.7	0.001		0.7
V	0.001	0.15	0.001	0.15	0.001	0.15	0.001	0.15	0.001	0.15	0.001	0.15	0.001		0.15
Zn	0.002	2	0.002	2	0.002	5	0.002	2	0.002	2	0.002	13.5	0.002		13.5
Zr	0.005	0.25	0.005	0.25	0.005	0.25	0.005	0.25	0.005	0.25	0.005	0.25	0.005		1
Al	Internal standard		Internal standard		Internal standard		Internal standard		Internal standard		Internal standard		Internal standard

用戶提供標樣，日立分析儀器可現場延長測量上限。

FOUNDRY-MASTER Smart直讀光譜儀銅基體分析范圍

元素	Cu 050		Cu 100		Cu 200		Cu 300		Cu 350		Cu 400		Cu 450		Cu 500		Cu 000
	low alloy Cu		Cu-Be/Co/Ag		Cu-Zn Brass		Cu-Sn-Pb Bronze		Cu-Sn-Zn-Pb alloys Gunmetal		Cu-Ni alloys white copper		Cu-Zn-Ni alloys		Cu-Al alloys		Cu-Orientation
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
Ag	0.002	0.3	0.002	1.7	0.002	1	0.002	0.5	0.002	0.1	-	-	-	-	-	-	0.002	1.2
Al	0.001	1	0.001	0.12	0.002	3	0.001	0.7	0.001	0.5	0.001	0.7	-	-	0.001	13	0.001	13
As	0.001	0.5	-	-	0.001	0.5	0.001	0.5	0.001	0.25	-	-	-	-	0.001	0.5	0.001	0.5
B	0.002	0.1	0.002	0.1	-	-	-	-	-	-	-	-	-	-	-	-	0.002	0.1
Be	0.0002	0.6	0.0002	2.6	-	-	0.0002	0.25	0.0002	0.25	-	-	-	-	-	-	0.0002	2.5
Bi	0.003	0.5	-	-	0.005	6	0.003	0.5	0.003	7	0.003	0.2	-	-	-	-	0.003	7
Cd	0.002	1	-	-	0.0005	0.1	0.003	0.1	0.003	0.1	-	-	-	-	-	-	0.003	1.3
Co	0.005	1	0.005	3.6	0.005	1.5	0.005	0.7	0.005	0.7	0.005	0.7	-	-	0.005	0.3	0.005	3.6
Cr	0.001	1	0.001	0.1	0.001	0.5	0.001	0.7	0.001	0.1	0.001	3.5	-	-	0.001	0.5	0.001	3.5
Fe	0.005	1	0.005	0.2	0.005	7	0.005	1.5	0.005	0.75	0.005	3	0.005	1.5	0.005	7	0.005	7.5
Mg	0.0005	0.25	-	-	0.0005	0.2	0.0005	0.25	-	-	0.0005	0.25	-	-	0.0005	0.25	0.0005	0.25
Mn	0.002	1	0.002	0.07	0.002	5	0.002	0.5	0.002	0.5	0.002	1.5	0.002	1	0.002	2	0.002	15
Nb	0.002	1	-	-	-	-	0.002	1	-	-	0.002	1	0.002	1	-	-	0.002	1
Ni	0.002	1	0.002	0.12	0.005	5	0.002	3	0.002	3	0.002	42	0.002	20	0.002	7	0.002	42
P	0.002	0.7	-	-	0.003	0.8	0.002	1	0.002	0.3	0.002	1	0.002	0.1	0.002	1	0.002	1
Pb	0.002	1	0.002	0.25	0.005	5	0.002	25	0.002	10	0.002	1	0.002	0.5	0.002	1	0.002	25
S	0.001	0.2	-	-	0.002	0.15	0.001	0.2	-	-	0.001	0.2	-	-	-	-	0.001	0.2
Sb	0.005	0.75	-	-	0.005	0.6	0.005	0.75	0.005	0.75	0.005	0.75	-	-	0.005	0.75	0.005	0.75
Se	0.001	1	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.001	1
Si	0.003	1	0.003	0.2	0.005	7.5	0.003	0.5	0.003	0.1	0.003	1	0.003	1	0.003	0.5	0.003	8.5
Sn	0.002	1	0.002	0.1	0.005	5	0.002	20	0.002	11	0.002	0.5	0.002	0.2	0.002	0.5	0.002	20
Te	0.005	1	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.005	1
Ti	0.001	0.07	-	-	-	-	-	-	-	-	0.001	0.07	0.001	0.07	-	-	0.001	0.07
Zn	0.005	1	0.005	0.15	0.005	45	0.005	10	0.005	15	0.005	0.5	0.005	30	0.005	1	0.005	50
Zr	0.002	0.06	-	-	0.002	0.06	0.002	0.06	-	-	0.002	0.06	0.002	0.06	-	-	0.002	0.06
Cu	Internal Standard		Internal Standard		Internal Standard		Internal Standard		Internal Standard		Internal Standard		Internal Standard		Internal Standard		Internal Standard

用戶提供標樣，日立分析儀器可現場延長測量上限。

FOUNDRY-MASTER Smart直讀光譜儀鎳基體分析范圍

元素	Ni 100		Ni 200		Ni 300		Ni 400		Ni 500		Ni 600		Ni 700		Ni 000
	low alloy		Monel		Nimonic		Incoloy		Inconel		Hastelloy		Marmalloy		Orientation
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
Al	0.005	2	0.005	4.5	0.005	2	0.005	0.5	0.005	3	0.005	0.5	2	7	0.005	8.5
B	0.001	0.05	-	-	0.001	0.05	0.001	0.05	0.001	0.05	0.001	0.05	0.001	0.05	0.001	3.6
C	0.002	0.5	0.002	0.5	0.0005	0.5	0.002	0.5	0.002	0.5	0.002	0.5	0.002	0.5	0.002	0.5
Co	0.002	2	0.002	2	0.002	25	0.002	22	0.002	21	0.002	3	0.002	21	0.002	25
Cr	0.002	1	0.002	3	12	33	10	25	10	33	0.002	25	2	25	0.002	35
Cu	0.002	2	22	35	0.002	1	0.002	4	0.002	35	0.002	1.5	0.002	2	0.002	35
Fe	0.005	2	0.005	5	0.005	20	10	45	0.005	50	0.005	25	0.005	3	0.005	50
Hf	-	-	-	-	-	-	-	-	-	-	-	-	0.005	2	0.005	2
Mg	0.0005	0.15	0.0005	0.15	0.0005	0.15	0.0005	0.15	0.0005	0.15	0.0005	0.15	0.0005	0.15	0.0005	0.15
Mn	0.001	2	0.001	3.5	0.001	3.2	0.001	3.2	0.001	3.2	0.001	3.2	0.001	0.5	0.001	3.5
Mo	0.002	2	-	-	0.002	10	0.002	8	0.002	12	0.002	36	0.002	5	0.002	40
Nb	0.005	2	-	-	0.005	1	0.005	4	0.005	8	0.005	8	0.005	2	0.005	8.5
P	0.005	0.08	-	-	-	-	-	-	-	-	-	-	-	-	0.005	0.08
Pb	0.005	0.08	-	-	-	-	-	-	-	-	-	-	-	-	0.005	0.08
S	0.001	0.07	0.003	0.15	0.003	0.15	0.003	0.15	0.003	0.15	0.003	0.15	0.003	0.15	0.003	0.15
Si	0.005	0.5	0.005	7	0.005	2	0.005	3	0.005	2.5	0.005	2.5	0.005	1	0.005	8
Sn	0.005	0.8	-	-	0.005	0.8	0.005	0.7	0.005	0.8	0.005	0.7	0.005	0.7	0.005	0.8
Ta	-	-	-	-	-	-	-	-	-	-	-	-	0.01	8	0.01	8
Ti	0.005	2	0.005	1.5	0.005	6	0.005	6	0.005	6	0.005	6	0.005	2.5	0.005	7
V	0.005	1	0.005	1	0.005	1.2	0.005	1.2	0.005	1.2	0.005	1.2	0.005	1.2	0.005	1
W	0.015	1	-	-	0.015	3	0.015	3	0.015	5	0.015	13.5	3	13.5	0.015	13.5
Zr	0.005	0.35	-	-	0.005	0.35	0.005	0.35	0.001	0.35	0.005	0.35	0.005	0.35	0.005	0.35
Ni	internal Standard		internal Standard		internal Standard		internal Standard		internal Standard		internal Standard		internal Standard		internal Standard

用戶提供標樣，日立分析儀器可現場延長測量上限。

注意事項：
儀器成套性與可選購件可參考產品原頁面，本頁只提供儀器核心技術參數。
產品價格均含有商品運費（大陸地區除外）及發票的價格但是不包含工程師上門培訓及調試的費用。
科信不保證網站展示產品的時效性,部分儀器可能已升級,保留最終解釋權。

科信報價：￥0.00